Are you having trouble starting your motorcycle? This is a challenge every motorcycle driver can be faced with, and if this is your case, this is the post for you. Learn more about the reasons that can cause your motorcycle to not start by reading this article that D&M Marketing, LCC, has for you.

Whether you are a new rider or an experienced one, every rider encounters the problem of their motorcycle not starting from time to time. There are a few different reasons that can cause this issue, some easier to fix than others, but either way, being informed about them can make the difference in getting you out of the situation. Keep reading this article that D&M Marketing, LCC, in Covington has for you to learn why your motorcycle won't start.

Not Enough Fuel

A common reason for motorcycles not starting is when fuel levels go down. There are a few ways you can check if your bike has fuel or not, one of them being gently shaking the motorcycle when on main stand and hear for the typical telltale slot of remaining fuel in your tank. If you notice there is no fuel left, refuel your tank with gas and try to start your motorcycle again.

Is Your Carburetor Dirty?

After a while of use, without being properly cleaned, your carburetor can start to build up dirt and deposits that can cause blockages in fuel passageways. Also, by not using fuel filters, this problem can happen way sooner. One way you can check if you have a dirty carburetor is by taking your intake off, pushing the starter, and squirting some starter fluid into your carburetor. If, after doing this, you notice it starting to rev up, then you most probably have a dirty carburetor. Properly clean your carburetor and see if your motorcycle starts up.

The best way to ensure that your motorcycle works at its best is by giving it the proper maintenance. Give your engine the best products in the market. Speak with a professional at D&M Marketing, LCC, in Covington, and get familiar with all the fantastic motorcycle oil and products AMSOIL offers. Visit the online store or call (770) 312-7542 for more information.

Spark Plug Not Working Properly

To test if you are having trouble with your spark plugs, start by removing one plug from the engine. If you find that your plug is fouled or wet with unburned fuel, it is very probable that you lost your plug. If your plug is fouled, you can try and give it a proper cleaning, make sure there aren't any fuel residues, and put it back into the cap. Lay the plug on the engine case and crank the engine over. Observe the plug carefully and look for a blue spark coming from the tip. If there doesn't seem to be a spark, replace your spark plug, install it and try to start up your motorcycle one more time.

After Long-Time Storage

When a motorcycle has been in storage for a long time, it can encounter several problems that can prevent it from starting up again. One of the most common problems is that gas tends to break down when not stabilized correctly. This can also happen when gas is combined with ethanol. Give your engine a fuel change and also consider giving your motorcycle an oil change while you are at it.

If you are looking for the best motorcycle oil for your engine, try AMSOIL's 20W-40 Synthetic V-Twin Motorcycle Oil. Enjoy the best lubrication and protection for your motorcycle. Learn about the benefits of a synthetic oil change by speaking with an expert at D&M Marketing, LCC, in Covington, GA, today by calling (770) 312-7542.

Is Your Injector Clogged?

Another common thing that happens is that, when trying to start your motorcycle, it will try to turn over normally, but there won't be any combustion. If you have discarded the previous probable causes mentioned in this article, then you are probably dealing with a clogged fuel injector. You can inspect your fuel injectors by yourself, are they dirty? Do they look obstructed? If so, they probably need a good cleaning or in some cases, replacement.

Compression

Your compression is the last thing you want to inspect, as this process can take a heavy toll on your motorcycle. Something that could be happening is that one of your cylinders has little or no compression. When this happens, engines tend to refuse to fire up. To fix this, you will need to compress the air and fuel mixture to raise the temperature and get the mixture burning. You can also use a compression tester. This process can be quite expensive and complicated, so the best option is for you to get an expert's opinion to ensure the wellbeing of your motorcycle.

Give Your Motorcycle Proper Maintenance with the Help of the Experts at D&M Marketing, LCC, in Covington

To prevent you from being in the situation where your motorcycle won't start, ensure you are giving your engine the care it needs. AMSOIL's 20W-40 Synthetic V-Twin Motorcycle Oil will provide your engine lubrication and maximum protection. Learn about the benefits of a synthetic oil change and about all the products that will ensure your motorcycle is in top condition by visiting the online store or calling (770) 312-7542 today!